Drawout switchgears D-...-2S series

Home page/Offer/Products/MV switchgear in air insulation/Drawout switchgears D-...-2S series

Purpose

Dual busbar system switchgears D-...-2S series with air insulation are dedicated for energy distribution in AC networks with frequency at 50 Hz and rated voltage up to 36 kV. They are applied in energetics and industry. We recommend them for electrical substations, where high reliability of power supply is required.

Application

  • in electricity distribution networks and industrial plants,
  • in secondary distribution,
  • in industrial plants,
  • in unmanned distribution substations.

General characteristics

D-...-2S are indoor, free-standing, metal-clad switchgear including individual cubicles connected by two busbar systems. Applied interlocks provide safe operation. System of fast arc detecting and switching can be applied. Following versions can be manufactured:

  • standard version with manual drive,
  • remote, dedicated to operate in automatic substations, with motor drive (maneuvering the earthing switch and changing the position of withdrawable unit from test to connected and reverse). Works seamlessly with any digital control system. Auxiliary circuits compartment can be extend by additional control cubicle installed beyond the switchgear,
  • mixed version (disconnectors with motor drive, rest with manual drives).

In addition we offer enforced switchgear D-12-2S type (50 kA),
D-12-2S type with IP 54 dedicated for mining industry with WUG certificate and switchgears with special design, in which compartments can be installed on a various levels:

  • D-12-2S (72 kA),
  • D-36-2S with rated voltage at 36 kV.

Features

  • extraordinary compact design among the dual busbar system switchgears to 36 kV,
  • safety level increased due to implementing internal gas decompression system (when minimum 2 cubicles),
  • connecting operations performed with doors closed with
  • IP 4X, IP 41 or IP 54 - in D-12-2S to 1600 A for mining industry with approval of the president of state mining authority (WUG) to used in underground mining plants,
  • easy operating,
  • correct sequence of connecting operations due to applying comprehensive system of interlocks,
  • high level of security for people close to the switchgear at the moment of possible arc fault,
  • maintenance works inside a cubicle can be performed without de-energizing the switchgear,
  • short time of replacement the circuit breakers / contactors,
  • easy access to cables and devices,
  • voltage indicators in each cubicle,
  • long-living device,
  • requires only rare maintenance works,
  • environmental-friendly operation,
  • professional manufacturer's service.

Exemplary sections of the D-17-2S switchgear with manual disconnectors

Circuit breaker cubicleCrossbar switch

Cross-section of the D-12-2S (72 kA)

 Bottom cubicleUpper cubicle

Technical data

Type of the switchgear D-12-2S D-17-2S D-24-2S D-36-2S
Rated voltage kV  12 17,5 24 36 
Power frequency withstand voltage kV  28 / 421)  38 50 70 
Lightning impulse withstand voltage kV  75 95  125  170 
Rated current:      
normal
short-time withstand current
peak withstand current
A
kA/s
kA
up to 4000
up to 72/1
up to 180
up to 1600
up to 31,5/3
up to 80
up to 2000
up to 25/3
up to 63
up to 2500
up to 40/1
up to 100
Internal arc withstand current kA/s up to 72/1 up to 31,5/1 up to 25/1 up to 40/1
Rated frequency Hz 50    
Degree of protection    IP 41 / IP 542)  IP 41 IP 41  IP 4X 
Dimensions of cubicles:      
width [A]
height [B]
depth [C]
mm
mm
mm
600 ÷ 1200
2690 ÷ 3270
1790 ÷ 1990
650, 800
2690
1790
800 ÷ 1200
3200
1980
1500 ÷ 2000
1200 ÷ 3000
1400 ÷ 2500
Internal Arc Classification   AFLR
Partition class   PM
Loss of Service Continuity Classification   LSC2B
Compliance with standards   PN-EN 62271-200; PN-EN 62271-1, GOST 14693-90, GOST 15163-96
1) According to GOST
2) Approval of the president of state mining authority (WUG) - according up to 31,5 kA/1s, up to 1600 A

Exemplary schematic diagrams

Product card in pdf formatDrawout switchgears D-12-2S series plik .pdf

Ask for a product
+48 63 24 66 348

* required fields

 

do góry